What is VCDS?

1. Free Vcds Software Download
2. Vcds Free Download

• Vag Com 11.11.5 Cz - DOWNLOAD. Host Rental in Rio de Janeiro.
• If you're using VCDS on a PC that's on-line, it should tell you when there's an update available, but if in doubt, check this page. Release Notes: Release 21.3 works with Windows 7.
• Discussion in 'Ross Tech VCDS forum. I tried out VCDS 12.10.1 Beta today and when I ran it there is a new VCDS 11.11.5 out now 22/12.Ross-Tech have released VCDS update software version 11.11.5. The update is free to all licensed VCDS users. To download the update visit the Ross-tech software.

Hellooo mate any your help. Any software to vcds. Soft 11.11.0 to 11.11.5.

VCDS (www.ross-tech.com)is short called “VAG-COM Diagnostic System ”,also called VAG-COM.VCDS is primarity used for diagnostic and adjustment for Volkswagen Group vehicle.VCDS will perform most of functions that only performed by expensive official dealers,it is very suitable for DIY user and garage.

VCDS Functions List:

Auto Scan

Control Unit Info

Read Fault Codes

Output Tests

Selective Output Tests

Basic Setting

Clear Fault Codes

Close Controller

Code Module

Code Slave Modules

Measuring Blocks

Advanced Measuring Values

Single Reading

Adaptation

Login/Coding II

View Readiness

Guided Readiness Scripts

Security Access

Support Codes

Generic OBD-II

Freeze-Frame Data

Dual K-Line Support

Digit PINs (VAS only)

Code Database Up to Date

Diagnostics via CAN

Transport Mode

Support for Dual ECUs

Data Logging

HighSpeed DataLogging

Real-Time Graphs

Real-Time Gauges

Graphic TDI Timing Checker

Control Module Finder

Automate Service Reset (SRI)

ECU Mileage Checker

Controller Channel Maps

Wireless Connection via WiFI

Installation List

LT3/Crafter Support

VCDS Support Vehicle Models List:

The following VCDS Compatibility Charts are based on Model and Chassis Type. To find the Chassis Type for your car, look at the 7th and 8th digits of the VIN number. The Chassis type will usually be found in these digits. There are exceptions.

Example (Audi A6):

VIN: WAUZZZ4F36N111022

The 7th and 8th digits are 4F for Audi A6 (4F), the 10th digit is 6 which stands for Model Year (MY) 2006. See the Model information Column for Audi to find the A6 Model. Note that the Chassis Type “4F” is listed under that model. Look horizontally across the VCDS Compatibility Chart until you find the Model Year 2006 and you can determine which interface(s) is required for that Chassis. In this particular case you will see that only the HEX+CAN series interface is compatible.

Please Note: Older VCDS versions may not support all of the model years listed. These charts are intended for the most current version of VCDS (in rare cases even Beta Versions).

Check the VCDS Compatibility Charts to get details

VCDS Support Languages:

Česky,Chinese,Dansk,Deutsch ,Español ,Français,Italiano,Magyar ,Nederlands,Polski,Português,Romana,Russian,Svenska

VCDS software, free download

VCDS v.20.4.0.ENG

VCDSLoader_v9.2

Password: mhhauto

VCDS with Loader v9.2 – English 19.6.0, non-English (tested PL and HU)

VCDS 17.8 MULTILANGUAGE FULL.txt

Below download links are shared from some forum member,for newest software please go to original official website:https://www.ross-tech.com

In pack you will find:

1. a) eeprom+firmware(2 types)
2. b) hardware type detect program to know what to flash inside.
3. c) flash interface by usb (interface with genuine firmware , must be connected to 12V)
4. d) loader to be used with any genuine install kit
5. e) info.pdf to read how to do stuff
6. f) projects already made to flash by programmer (tl866 or usbasp)
7. g) ept and xml files for ft232rl or rq just in case.

LOADER V2.txt

Update 14.08.2017

Loader V2 compatible with RL-RQ-BL-BM interfaces.

Reworked tool for update interface by USB – keeps count of type of hw in eeprom.

New eeprom dumps for each version of hardware

Included in pack Progisp v1.72 and also Mprog 3.5 with templates

Remade projects with new dumps for Progisp and TL866

All versions released until today on any language work even NEZ one 🙂

UPA VCDS FUSES for HW44 and HW46.zip

VCDS Loader V4.txt

New version with new eeprom, need to rewrite your interface with new usb flasher.

One multilingual eeprom is not possible anymore. Use VAGCOM_EEWriteLang to write eeprom of your choice.

VCDS Computer Requirements:

VCDS requires a computer running Microsoft Windows (the HEX-NET can be used with VCDS-Mobile on other platforms but that use is still in beta testing). A Laptop is most convenient but a desktop PC can also be used.
We recommend a PC running Windows 7, 8.1, or 10 with at least 2GB of RAM (single-core Atom-class processors are no longer recommended). Screen resolution of at least 800×600 is recommended.

How to Install VCDS Software:

Double click the icon desktop，wait for installing，as shown:

Wait for progress complete to 100%

Select “Next”

Check “I accept the terms of the License Agreement”

Select “Next”

Select components to install,then select “Next”

Wait for progress complete

Click “Finish”

How to use VCDS:

Run VCDS software，connect VCDS VAG COM to your computer USB interface

Click options

Click Test,show that VCDS VAG COM hardware has been activated

Then click save，you can use VCDS VAG COM to test your car

As shown，choose function you want

Current Version of VCDS® for customers with High-
Tech HEX, KEY, KII or Micro-CAN Series Interfaces

VCDS is Copyright 2000-2021 by Ross-Tech, LLC / Uwe M. Ross. All rights are reserved. De-compilation, disassembly, reverse-engineering, alteration, use as a reference tool for the purpose of developing a product with similar functionality, and re-distribution in any form without the prior written consent of the author is prohibited.

By downloading this software, you acknowledge that this Program is provided 'as is' and 'with all faults, defects and errors' and that all use of the Program is at your own full risk. It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.

Instructions:

• Download the self-installing distribution file available below.

• Run it and follow the prompts to allow it to install itself.

• The installer will prompt you if you wish to see a PDF of installation instructions. That PDF can be downloaded here.

• You must install VCDS on your PC's hard disk!

  • It may not work properly if you try running it directly from other media.

  • You do not need internet access while using VCDS, however, internet access is required to update the firmware in our current generation of interfaces (HEX-NET and HEX-V2). So make sure your interface firmware is up-to-date before trying to use VCDS someplace that doesn't have internet access.

• Connect an appropriate interface between the computer and the car.

• Turn the car's ignition switch ON. No need to start the engine.

• Start the VCDS program:

  • Click [Options] and select the correct communications port.

  • Use [Test] to confirm that the program can use the port and find the interface.

  • Then [Save].

• Now Play. Make sure the software can reliably access all the control modules that it should in your car. See our Application Charts. Query Fault Codes from some modules.

• Please check frequently for updates! If you're using VCDS on a PC that's on-line, it should tell you when there's an update available, but if in doubt, check this page.

ReleaseNotes:

• Release 21.3 works with Windows 7, 8, and 10 (both 32-bit and 64-bit)

  • Earlier versions of Windows such as 2000, XP, and Vista might still work, but we no longer consider them supported.

  • VCDS does not work on Windows 10 running in 'S mode', because 'S mode' prevents software from being installed from any source other than the Microsoft Store. If wish to use VCDS on a computer that came with the 'S' version of Windows, you'll have to switch it to run in Home or Pro mode. Devices with ARM CPUs are NOT SUPPORTED.

  • Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.

  • Windows 95, 98, ME, and NT4 definitely will not work.

• Release 21.3 must be used with a licensed Ross-Tech interface. That includes all genuine HEX-, KEY-, KII-, or Micro-CAN series Interface of interfaces.

  • It does notwork with any third-party interfaces or some of the older 'low-tech' interfaces we made and sold before 2004.

  • If you're a registered user and have an older low-tech interface, you should consider our
    interface upgrade program.

  • If you're not ready for an interface upgrade, you'll have to use VCDS-Lite instead.

  • All model-year 2019 and newer cars require one of our current interfaces.
    Although this Release of VCDS still supports every interface Ross-Tech has sold since 2004, none of our legacy interfaces such as the HEX+CAN and Micro-CAN will work with 2019 model cars. If you intend to work with 2019 or newer cars and do not yet have a current interface, please contact your distributor or see this page for upgrade options.

  • Support for 'Mk.8' and ID.x chassis is premliminary.
    Auto-Scan should work on these cars, as should most functions that read data, but SFD will limit changes in some control modules. Nonetheless, would appreciate scans and channel maps, preferably posted in our forum.

• The default installation folder is C:Ross-TechVCDS

  • It is essential NOT to install in the Program Files tree in on systems running Windows Vista or newer.

• To remove other old versions:

  • Versions prior to Release 704, simply delete the shortcuts from your Start menu and
    Desktop and delete the folder(s) where the program was installed..

  • Release 704 and newer may be uninstalled using Windows' Add/Remove Programs or by running the
    Uninstall.exe program found in the folder with the version that you wish to remove.

Download:

Includes the VC-Scope and TDI Timing Checker 'Plug-Ins'

Additional handy links:

Interactive On-Line Manual

Printable Manual ( ~5 MB)
Download PDF Format VCDS Manual
(Right-Click on the above link and select 'Save Target As..')
You'll need Adobe Acrobat Reader to open the Manual,
if you don't have it you can get it here
You should tell your PDF reader to 'Fit to Printable Area' or use similar instructions
when printing in order to make the images and text as legible as possible.

Free Vcds Software Download

Vcds Free Download